الحديد المختزل
تفاصيل المنتج Direct Reduced Iron (DRI) Source of a clean and rich in metallic Iron Suez steel Co. produce a high Fe, low residual metallic material for producing High quality iron and steel products in a wide variety of furnaces Benefits of Using DRI in the EAF Very low residual element content Can be continuously fed to the furnace. Predictable, uniform & certified chemical analysis Can be hot-charged in integrated plants Predictable mass and heat balances Better slag foaming Carbon content can be tailored to EAF requirements Control of nitrogen in steel Easier to handle than scrap Melt consistency Chemical parameters Total Iron (FET %) 91% min. –typical 93% Metallic Iron (Fem %) 85% min. – typical 88% Metallization 93% min – typical 95% Carbon (C %) 2 – 3% - typical 2.5% Sulphur (S%) 0.01% max Gangue (SiO2, CaO, MgO, Al2O3 %) 4% max. Size Parameters Available in pellets with diameter size (9-16) mm.
حديد تسليح
لفائف الحديد
البليت
الدولوميت المحروق
تفاصيل المنتج Dolomitic Quicklime Multipurpose product for a wide range of applications Dolomitic quicklime is lime made from high-quality deposits of dolomitic Limestone; limestone containing 40% to 44% magnesium carbonate (MgCO3) where the dolomitic stone burnt in a high technology kiln getting a perfect quality SSC Dolomitic quicklime is suitable for a wide range of applications. These include: Iron and steel making. Environmental applications. Wastewater treatment. Production of heat refractories. Production of magnesium. And many other applications Chemical parameters Magnesium oxide (MgO %) 30% max. –typical 32% Calcium oxide (CaO %) 50% min. – typical 54% Silicon oxide (SiO2 %) 1% max Size Parameters Available in bulk size (0-50) mm
منتجات الثني و التقطيع
Cutting and bending, supplied by the leading Italian MEP group in this field, enables us to deliver cut and folded bars between 6 and 40 mm in diameter, "at the appropriate time" to the construction site, according to detailed contractor plans. SSC offers cut and bent bars through a JIT (just in time) delivery system at the contractor`s construction site, according to their blueprints and in compliance with schedules and individualized bundle. The cut & bend division produces shapes and stirrups in the required lengths and bent shapes for use in reinforced concrete structures. The production process is automated through the use of specialized machinery to enable high volume production with minimum labor requirements. The advantages To Contractors Through its post-sale service, SSC provides an on-going follow-up service at each construction site, performed by a team of professionals of the highest level. Contractors are aware of the advantages of purchasing cut & bent steel versus bending it on site. Cut & bend is more advantageous because it: * Minimizes production costs through reduction of labor cost. * Eliminates waste; estimated at 5 to %8 from steel value. * Saves time and eliminates production errors, higher productivity and more accurate than manual on-site cut and bend. * Reduces financial costs. * Minimizes required storage space. * Reduces bar theft on site and double handling
بكر حديد التسليح
We also have temporary storage rolls such as European and international standards Rails diameters range from 8 to 16 mm and in coils wrapped in diameters from 8 to 12 mm.
لفائف حديد التسليح الأملس
5.5 - 13.5 mm Smooth Reinforced Coil with diameters according to Egyptian standards (ES 262/2009 Gr.240 All Smooth Reinforced Coil) These are steel coils with diameters of 10mm, 12mm A, B, C, D. and Gr.300.
حديد التسليح
The new rolling unit 3 can produce armature between 5.5 and 40 mm and uses advanced techniques that allow to reduce production costs. "The line has been run endlessly using integrated welding machine technology," according to the equipment supplier.
حديد البيلت
The molten iron is produced in ultra high-charge electric arc furnaces. Veins are poured steel into multi-polishing continuous casting machines
